Courses / Application of ICT (GEN-103) – BS 1st Semester

Week 10 Theory – Data Communications and Transmission Media

Week 10 – Data Communication and Transmission Media · 70 min read · 37 MCQs to check yourself

Data communication

Data communication is the exchange of data between two or more devices through a transmission medium (wire, cable or air) using agreed rules (protocols).

Characteristics of effective data communication: Delivery (to the correct destination), Accuracy (without errors), Timeliness (on time, especially for audio/video), and low Jitter (even delay between packets).

Data communication model (components)

 ┌────────┐   ┌─────────────┐   ┌────────────────────┐   ┌──────────┐   ┌──────────┐
 │ Sender │──►│ Transmitter │──►│ Transmission medium│──►│ Receiver │──►│Destination│
 │(source)│   │ (encoder,   │   │  (cable / air)     │   │ (decoder)│   │          │
 └────────┘   │  modem)     │   └────────────────────┘   └──────────┘   └──────────┘
                     ▲                 Noise
                Protocol (rules) on both sides

The five basic components:

  1. Message – the data/information to be sent (text, numbers, pictures, audio, video).
  2. Sender (source) – the device that sends the message (computer, phone, camera).
  3. Receiver (destination) – the device that receives the message.
  4. Transmission medium (channel) – the physical path: twisted-pair cable, coaxial cable, fibre optics, radio waves.
  5. Protocol – a set of rules that governs communication (format, timing, error checking), e.g. TCP/IP, HTTP. Without a protocol two devices can be connected but cannot communicate meaningfully.

The transmitter/encoder converts data into signals suitable for the medium; the receiver/decoder converts them back. Noise is unwanted interference that can corrupt the signal.

Data transmission

Data transmission is the physical transfer of data (as signals) over a communication channel.

Analog and digital signals / transmission

Analog signal Digital signal
Continuous wave that varies smoothly Discrete values – two states (0 and 1)
Represented by a sine wave Represented by square waves (pulses)
Affected more by noise; quality drops over distance Less affected by noise; can be regenerated exactly
Uses amplifiers Uses repeaters
e.g. human voice, old telephone lines, radio e.g. computer data, digital TV, fibre-optic Internet
 Analog:   ∿∿∿∿∿∿∿∿           Digital:  ┌┐ ┌──┐┌┐
                                        ┘└─┘  └┘└─

Modems

A modem (MOdulator–DEModulator) converts signals so that digital computers can communicate over analog lines (such as telephone or cable lines).

Asynchronous and synchronous transmission

Asynchronous transmission Synchronous transmission
Data sent one character (byte) at a time Data sent as blocks/frames of many characters
Each character has a start bit and stop bit No start/stop bits per character; sender and receiver share a clock (synchronised)
Irregular gaps allowed between characters Continuous stream, no gaps
Simple and cheap, but slower and less efficient Faster and more efficient, but more complex/expensive
e.g. keyboard to computer, older serial ports e.g. network data transfer, video conferencing
Asynchronous:  [start][1 0 1 1 0 0 1 0][stop]   gap   [start][........][stop]
Synchronous:   [sync][ char char char char char char ... ][end]

Transmission media

Transmission media are the physical paths through which signals travel.

Guided (wired / bounded) media

Signals are guided along a physical cable.

Medium Structure Features Uses
Twisted-pair cable Pairs of insulated copper wires twisted together to reduce interference (crosstalk). UTP (Unshielded) and STP (Shielded); categories Cat5e, Cat6, Cat6a Cheapest, easy to install; limited distance (~100 m); prone to interference Telephone lines, Ethernet LANs (RJ-45 connector)
Coaxial cable Central copper conductor, insulation, metal braided shield, outer jacket Better noise protection and bandwidth than twisted pair; thicker Cable TV, CCTV, older Ethernet, Internet over cable
Fibre-optic cable Thin glass/plastic core carrying light pulses, surrounded by cladding (total internal reflection) and jacket. Single-mode (long distance, laser) and multi-mode (short distance, LED) Highest bandwidth and speed, very long distances, immune to electromagnetic interference, secure, light; but expensive and hard to install/repair Internet backbones, undersea cables, FTTH broadband

Unguided (wireless / unbounded) media

Signals travel through air, vacuum or water as electromagnetic waves without a physical conductor.

Medium Features Uses
Radio waves Omnidirectional, travel long distances, can pass through walls AM/FM radio, Wi-Fi, Bluetooth, mobile phones, walkie-talkies
Microwaves High frequency, line-of-sight, use dish antennas on towers (terrestrial) every 30–50 km Long-distance telephone, TV links, mobile backhaul
Satellite communication Microwave signals relayed by satellites in orbit (uplink/downlink); wide coverage TV broadcasting, GPS, weather, remote Internet (e.g. Starlink), Pakistan's PakSat-1R
Infrared Short range, line-of-sight, cannot pass through walls TV remote controls, old phone data transfer
Bluetooth Short-range radio (~10 m) Wireless headphones, mouse, file transfer (PAN)
Wi-Fi Radio-based wireless LAN Home/office Internet
Guided Unguided
Uses physical cable Uses air/space (electromagnetic waves)
More secure, less interference Less secure, more interference
Limited mobility Supports mobility
e.g. twisted pair, coaxial, fibre e.g. radio, microwave, satellite, infrared

The Internet: Wires, Cables & Wi-Fi (Code.org)

Guided Media: Twisted-Pair, Coaxial and Fibre-Optic Cable

Short and long questions

1. Explain the data communication model with a diagram. Also explain the characteristics of effective communication.

Model answer

Diagram: Sender → Transmitter (encoder/modem) → Transmission medium → Receiver (decoder) → Destination, with protocol rules on both sides and noise affecting the medium. Components: (1) Message – data to be communicated (text, audio, video). (2) Sender – device that sends data. (3) Receiver – device that receives data. (4) Transmission medium – physical path such as cable or radio waves. (5) Protocol – set of rules both sides must follow. Characteristics: delivery to the correct destination, accuracy (no errors), timeliness (on time), and low jitter (uniform delay). Bandwidth (bps) and noise affect communication quality.

2. Differentiate between serial and parallel transmission.

Model answer

In serial transmission bits are sent one after another over one line (cheaper, good for long distances, e.g. USB). In parallel transmission several bits are sent simultaneously over multiple lines (faster over short distances, e.g. internal buses, old printer ports).

3. What is a protocol?

Model answer

A protocol is a set of rules that governs data communication — it defines the format, timing, sequence and error control of messages (e.g. TCP/IP, HTTP).

4. Define data communication. Name its components.

Model answer

Data communication is the exchange of data between two or more devices through a transmission medium using protocols. Components: message, sender, receiver, transmission medium and protocol.

5. Differentiate between analog and digital signals.

Model answer

An analog signal is a continuous wave that varies smoothly, is more affected by noise and uses amplifiers (e.g. voice). A digital signal has discrete values 0 and 1 (square pulses), is less affected by noise and uses repeaters (e.g. computer data).

6. Explain analog and digital transmission, modems, and asynchronous vs synchronous transmission.

Model answer

Analog transmission uses continuous waves (voice, radio); noise accumulates and amplifiers are used. Digital transmission uses discrete pulses (0/1); less affected by noise, repeaters regenerate signals, supports error detection. Modem: converts digital data to analog (modulation) at the sender and analog back to digital (demodulation) at the receiver so computers can communicate over telephone/cable lines; types – dial-up (56 Kbps), DSL, cable, fibre ONT, mobile 4G/5G; speed in bps. Asynchronous transmission: sends one character at a time, each with a start bit and stop bit, with irregular gaps; simple, cheap but less efficient (keyboards). Synchronous transmission: sends blocks of data continuously with synchronised clocks and no per-character start/stop bits; fast and efficient but more complex (network data transfer).

7. What is a modem? Why is it needed?

Model answer

A modem (modulator–demodulator) converts digital signals from a computer into analog signals for transmission over telephone/cable lines (modulation) and converts received analog signals back into digital (demodulation). It is needed because computers are digital while many communication lines carry analog signals.

8. Differentiate between asynchronous and synchronous transmission.

Model answer

Asynchronous: one character at a time with start and stop bits; irregular gaps allowed; simple, cheap, slower (e.g. keyboard). Synchronous: data sent in blocks; sender and receiver clocks synchronised; no start/stop bits per character; faster and efficient but more complex (e.g. network transfers).

9. What are transmission media? Explain guided and unguided media with their types.

Model answer

Transmission media are the physical paths through which data signals travel from sender to receiver. Guided (wired): (1) Twisted pair – twisted insulated copper pairs (UTP/STP), cheap, used in telephone lines and Ethernet with RJ-45; limited to about 100 m, prone to interference. (2) Coaxial cable – central conductor, insulation, braided shield and jacket; better noise immunity; used for cable TV and CCTV. (3) Fibre-optic – light pulses in a glass core with cladding; highest bandwidth, long distance, immune to EMI, secure; expensive. Unguided (wireless): (1) Radio waves – omnidirectional, pass through walls; radio, Wi-Fi, mobile. (2) Microwaves – line-of-sight towers; long-distance links. (3) Satellite – microwave relay through orbiting satellites; TV, GPS. (4) Infrared – short range, line-of-sight; remote controls. (5) Bluetooth – short-range radio; headphones. Guided media are more secure with less interference; unguided media allow mobility but are less secure.

10. Write a note on fibre-optic cable.

Model answer

Fibre-optic cable carries data as light pulses through a thin glass/plastic core surrounded by cladding that keeps light inside by total internal reflection. It offers very high bandwidth, long distances, immunity to electromagnetic interference and security, but it is expensive and difficult to install and repair. Used in Internet backbones and FTTH.

11. Name four types of unguided media with one use of each.

Model answer

Radio waves – FM radio, Wi-Fi; microwaves – long-distance telephone/TV links; satellite – GPS and TV broadcasting; infrared – TV remote controls (also Bluetooth – wireless headphones).

This lesson ends with a quiz of 37 MCQs. Open the lesson on PrepOasis to take it and save your progress.

Previous: Mid-Term Revision and Exam Guide (Weeks 1–8) · Next: Week 10 Lab 10 – MS Excel: Interface, AutoFill, Formulas and Built-in Functions

All lessons in Application of ICT (GEN-103) – BS 1st Semester